There are few things more eye-catching than a pair of sparkling white Native American shoes. But if your beloved kicks are starting to look dull and dingy, it may be time for a good cleaning.
It’s important to note that the type of shoes you have determines the best cleaning methods. Some types of shoes can be washed in a washing machine, but Native American shoes must be hand-washed. Luckily, this isn’t as hard as it may sound. With the right know-how and products, you can bring your white Natives back to looking like new.
In this article, we’ll teach you how to clean white Native shoes so you can show off what originally drew you in. From pre-cleaning prep to post-cleaning maintenance, let’s get started on the right way to care for your Native kicks.
Preparing to Clean White Native Shoes
When it comes to keeping your beloved white Native American shoes looking fresh, the key is to properly clean them before you ever wear them. No matter how carefully you go about wearing them, they can get dirty over time. So, what’s the right way to clean them?
To start, you can use an all-purpose cleaner and an old toothbrush or a soft brush. This is great for getting into the grooves of your shoes and removing any dirt or debris that might be stuck there. For really tough spots, a washing machine can do the trick—but keep in mind that it won’t be able to reach certain tight grooves or corners of your shoes.
Finally, if you’re looking for something with a little more power behind it, try making a paste out of detergent and water. Spread this paste onto an old toothbrush and scrub away any dirt or grime that has been stubbornly sticking around on your shoes. With this method, you’ll be able to get into even the tiniest crevices of your Native American shoes.
The Best Way to Clean White Native Shoes
If you have white Native American shoes, you’ll want to keep them looking their very best. But with all that wear and tear throughout the day, dirt and grime can start to accumulate on the exterior. So what’s the best way to clean your white Natives?
We recommend using a Magic Eraser and Dawn dish soap (or a similar non-abrasive cleaner). Dip a clean cloth or sponge in warm water, add a few drops of Dawn, and gently rub your Native American shoes. You’ll want to make sure not to apply too much pressure while scrubbing so you don’t damage the shoe material.
You can also disinfect your shoes with isopropyl alcohol; this should be done while they are dry. Alternatively, you can also throw them in the washing machine on a gentle cycle with cold water and mild laundry detergent. Make sure not to place them inside the dryer, as this will damage the shoes. With these simple steps, your white Native Americans will be as good as new.
DIY Cleaners and Methods for Cleaning White Native Shoes
If you want to make a DIY cleaner for your white Natives or Crocs, there are some great options. Many people swear by all-purpose cleaners like Fantastik—simply add a bit of cleaner to an old toothbrush and gently brush away dirt and debris.
You can also combat any odor-causing bacteria with white vinegar. Dissolve 1 cup of vinegar in 2 liters of warm water and use an old toothbrush to brush away dirt. After that, let the shoe air dry for a day or two, and voila. Your shoes will look and smell as good as new ones.
An increased focus is occasionally required. To thoroughly clean your shoes in this situation, combine isopropyl alcohol with a cotton pad or cloth. Allow the shoes to air dry completely before putting them back on, just like with the other techniques.
Doing a bit of research online is always helpful if you’re unsure what sort of cleaning method might work best for your white Natives or Crocs—but whatever you do, don’t put them in the washing machine.
Professional Services to Clean White Native Shoes
You might be tempted to take your white Native American shoes to the local professional shoe cleaner, but before you do, there are a few things you should know. While some professional cleaners may accept Natives and Crocs, they’re better off being washed at home because they’re made of BPA- and phthalate-free materials.
Plus, cleaning your own shoes can save you money.
If you have a pair of Native Miles shoes, you’re in luck—these are designed for hand-washing for easy care. All you need is an all-purpose cleaner and an old toothbrush, and then just follow the manufacturer’s instructions for washing and drying.
For other styles of white Natives or Crocs, it’s best to err on the side of caution—hand washing these are still your best bet for keeping them looking as good as new. Plus, you don’t have to worry about any depreciation in the quality of your footwear due to professional cleaning.
Techniques to Extend the Life of Your White Native Shoes
When cleaning your white Native American shoes, there are a few tactics you can use to keep them looking pristine and lasting longer:
Native shoes are hand-washable, so you don’t have to worry about ruining them in the washer. Just fill up a basin or bucket with cold water, add mild soap, and make sure all excess dirt is gone before submerging your shoes. Let them soak for 10 minutes, then rinse with cold water. Finally, leave the shoes to air dry for about 12 hours before wearing them again.
Native Shoes’ shock-absorbent foam insoles provide superior cushioning that’s also resistant to odors and bacteria. But if you’re worried about your shoes getting a bit smelly after a long day of wear, an odor-neutralizing foot freshener spray can be used inside your shoes while they’re drying overnight.
To further extend the life of your Native Shoes, consider joining their Remix Program and recycling used or unworn Native Shoes at no cost to you. Through this program, they have recycled over 40,000 pairs of shoes. And even better, you will receive a discount code for 15% off your next purchase after submitting your used shoes.
Tips to Keep Your White Native Shoes Looking New
If you want to keep your white native shoes looking brand new all year round, you need to be diligent about cleaning them regularly. Here are some tips to help you take the best care of your white Native American shoes:
All-purpose Cleaner and Toothbrush
To get rid of dirt and dust on the surface, mix a few pumps of an all-purpose cleaner with some water and use an old toothbrush to scrub the entire surface. This should help clean off any tougher dirt or debris that your regular wipes aren’t able to remove.
Magic Eraser and Dawn Dish Soap
If you want to give your white Native American shoes a deeper clean, use a Magic Eraser with Dawn dish soap to remove any tough surface stains or dirt build-up. Make sure to rinse off any residue that’s left behind after cleaning with the Magic Eraser.
Gentle Scrubbing and Soap
Finally, give your white Native American shoes a gentle scrubbing with a cloth or soft-bristled brush and some gentle soap. This will not only help remove any remaining dirt or grime but also keep them looking squeaky clean for longer.
Choosing the Right Products to Use on White Native Shoes
When cleaning your white Native American shoes, it’s important to use the right products. As a reminder, Native shoes are made from EVA foam and other materials that are BPA and phthalate free, so you want to make sure you use products that don’t negatively affect them.
Here are some good products to use when cleaning white Native American shoes:
- Isopropyl alcohol – Isopropyl alcohol is great for getting rid of dirt and grime on your white Native shoes. Just make sure the alcohol isn’t too strong—try to find something with 70% or less alcohol content.
- Cold water and soap – For more gentle cleaning, mix a bit of soap with cold water in a bowl and then use a cloth to clean the shoes.
- Washing machine (Delicate Cycle) – Yep, you can actually wash some styles of Native shoes in the washing machine. Use a delicate cycle with cold water only for the best results.
By using these types of safe cleaning products, you can be sure your white native shoes will last longer without any damage or discoloration.
People Also Like: Save Time and Money: Easy Steps for Cleaning a Green Egg
Cleaning your white Native American shoes properly doesn’t have to be an intimidating task. With the right tools and technique, you can have your shoes looking like new in no time.
Beginning with taking off the laces, wash the shoe in warm, soapy water in the sink. Don’t rub too vigorously and make sure to use a soft-bristled brush. Use a mild, non-abrasive cleaner and a soft cloth to remove stains from surfaces. The shoe should be thoroughly rinsed and allowed to air dry overnight.
Taking proper care of your white Native American shoes is essential for keeping them clean and pristine for years to come. With the right cleaning techniques, you can be confident that your shoes will stay looking just like new.