How to Clean a Dirt Bike Helmet to Keep Them Shining

How to Clean a Dirt Bike Helmet to Keep Them Shining

Riding your dirt bike is more than a hobby; it’s a way of life! And if you want to keep riding, you need to take good care of your gear. That includes your helmet. Cleaning your helmet isn’t just about esthetics; it’s also essential for preserving the visor, paint job and padding that work together to keep you safe and comfortable.

Maintaining the cleanliness of your dirt bike helmet might be challenging. Don’t worry, though; we’re here to assist. In this post, we’ll go through the fundamentals of cleaning a dirt bike helmet and offer some practical advice so you can make sure this vital piece of safety equipment is always in great condition. Let’s get going!

Pre-Clean Preparation

Cleaning your dirt bike helmet is no small task, which is why it’s a good idea to take your time and do it right. First, you’ll need to gather all the necessary tools for the job, including a microfiber towel, natural soap, warm water and a soft bristle toothbrush.

Once you have all of your materials ready, start by soaking the microfiber towel in warm water. This will release any caked-on dirt and insects that may have become trapped on your helmet since your previous ride. After completely wetting the towel, carefully wipe clean the exterior of your helmet to remove dirt and grime.

Use a soft bristle toothbrush to reach hard-to-reach places like vents and gasket lining. By doing this, you can be sure that you won’t ruin any of the helmet’s protective components while cleaning it.

You’ll be prepared to start cleaning your helmet seriously after this.

Removing the Helmet Liner

A crucial step in cleaning your dirt bike helmet is taking off the liner. If the liner in your helmet is removable, you can remove it and wash it as necessary. It is recommended to hand-wash using a mild cleanser like baby shampoo.

Don’t worry if your helmet liner cannot be removed. It may be cleaned without taking the helmet off by combining some warm water and a tiny bit of Johnson and Johnson’s baby shampoo.

You’ll also want to soak (for at least 10 minutes) a microfiber towel in warm water first, then use the towel to gently rub and loosen up any caked-on dirt or bugs on the helmet liner.

Simply rinse with clean water when done and dry before putting back into your helmet. Patience is key here—give yourself enough time to thoroughly clean those parts that get clogged up with debris after a ride in the desert.

How to Safely Clean the Helmet Exterior

Use a microfiber cloth and a mild soapy solution, such as baby shampoo diluted in warm water, whenever you need to clean the outside of your helmet. By doing this, you may get rid of grime and mud without endangering the helmet itself.

To start, use a moist towel to wipe the dirt bike helmet clean and remove any loose dust and debris. Keep a close eye out for any grooves, fissures, vents, or other spots that might have caked-on dirt. After removing all of the loose debris, scrape away any leftover grease and dirt that has been caked on with a heavy-duty scrub brush or sponge (do not use a wire brush).

Use your mild soapy solution and a microfiber cloth to remove any remaining caked-on dirt after brushing it all away. To make sure nothing is left behind, use circular motions to wipe away any last bits of grime or residue from the helmet. Once you’re done, thoroughly rinse your helmet in clean water to get rid of all soap. Finally, use a second soft microfiber cloth or paper towels to dry your motorbike helmet before letting it air dry for at least one hour before putting it away.

Cleaning Your Visor and Keeping It Fog-Free

Remember to clean the visor when cleaning your dirt bike helmet. Due of the potential for dirt and debris to become trapped in the nooks and crannies, you should make sure to thoroughly clean it. However keep in mind that specific visor cleaners should be used rather than beginning to scrub with a paper towel.

What Are Visor Cleaners?

Visor cleansers are essentially chemical solutions created especially for cleaning helmet visors. Since most of them also have anti-fog coatings that can help prevent fogging during rides, they serve as both cleaners and protectors.

How to Use Visor Cleaners

Using visor cleaners is simple:

  1. Apply a bit of the cleaner directly on the surface of the visor.
  2. Rub it in using your cloth or paper towel in circular motions until you see a bit of lather forming on the surface of the visor.
  3. Rinse with water and let it air dry—you’re done!
  4. To add an extra layer of protection against fogging, apply some anti-fog coating to finish off your helmet deep-clean routine!

Restoring Natural Sheen to Helmet and Visor

Maintaining your visor’s cleanliness and restoring its natural sheen is easy. To fix any scratches and bring back the visor’s previous gloss, polish the metal on the visor’s outside. After thoroughly washing with water, use a soft cloth and soap with a neutral pH to scrape away any remaining dirt or grime. By applying visor shine protector to the exterior and inside of the helmet and visor, you can enhance their sheen and bring back their brilliance.

So long as you are gentle when it comes to cleaning your dirt bike helmet and visor, you’ll have a sparkling set for years to come!

Blocking UV Rays on the Outside

By cleaning your dirt bike helmet, you can also shield yourself from UV rays, something you might not be aware of. Normal window glass usually blocks UV-B and UV-C rays but lets UV-A light through, making it dangerous to wash your helmet outside on the patio or in the garage. Thankfully, there are some techniques you may use to safeguard yourself.


A basic window screen can be an effective way to reduce your exposure to UV rays. Screens block 30-80% of these harmful rays, depending on the denseness of the material. Make sure to move any furniture away from the windows so you’re able to move around easily while cleaning.

Wide-Brim Hats and Quality Sunglasses

To protect any exposed skin from UV radiation while cleaning your dirt bike helmet outside, put on a wide-brimmed hat or ball cap with a brim of at least 5 inches. Further protection can be obtained by using high-quality sunglasses with UVA and UVB protection as well as an anti-reflective coating.

You’ll get the best protection and prevent sun damage by using these recommendations for blocking UV rays while cleaning your dirt bike helmet outside.

People Also Like: How to Clean Your Balcony Floor Even if You Can’t Reach It


Cleaning your dirt bike helmet doesn‌ isn’t complicated, but it does take some effort to get it looking its best. Whether you’re a first-time helmet cleaner or a veteran, remember to start with the basics—a gentle wash and a good air dry—and then upgrade to more specialized methods as needed.

If you notice any damage or wear and tear, replace your helmet before it’s too late. Your helmet should be in top condition at all times, as any kind of damage could result in serious head injuries, so don’t take any chances.

With proper cleaning and maintenance, your dirt bike helmet will be clean and ready to go, so you can focus on the important part—having a blast out on the track.

Leave a Reply

Your email address will not be published. Required fields are marked *